Mercedes-Benz 380 SL 1984, Owner'S Manual

Page: 21 / 89

Controls
Combination Switch
1 Low beam (lighting switch
turned clockwise to 2nd notch)
2 High beam (lighting switch
turned clockwise to 2nd notch)
3 High beam flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the combination switch past the
point of resistance (up or down).
The switch is automatically can­
celled when the steering wheel is
turned by a large enough angle.
To signal minor directional changes
of the vehicle, such as changing
lanes on a highway, move combina­
tion switch to the point of resis­
tance only and hold it there.
6 Control for windshield washer
system
When the washer system is
switched on, the wipers also
operate.
7 Windshield wiper control
0 Windshield wiper switched off
1 Intermittent wiping
II Normal wiper speed
III High wiper speed
Note:
If one of the turn signals fails, the
turn signal indicator system flashes
and sounds at a faster sequence
than under normal operating condi­
tions.
Fog lamps will only operate to­
gether with low beam headlamps.
Fog lamps are turned off automati­
cally when lighting switch is
returned to off-position.
19