Mercedes-Benz 380 SL 1984, Owner'S Manual

Page: 18 / 89

Seats
Seat Belts
Warning System:
The indicator is illuminated for 4 -8
seconds after turning the steering
lock key to position “2” . If the seat
belt of the driver’s seat is not
fastened a warning buzzer sounds
simultaneously.
Fastening:
• Pull belt with latch plate (1) over
shoulder and lap. The belt must
not be twisted.
• Press latch plate (1) into buckle
(2) and allow to engage audibly.
• The belt must be tight and must
be checked for tightness imme­
diately after fastening and regu­
larly during the trip. If required,
tighten lap belt by pulling up on
the upper belt section.
Unfastening:
• Depress red button (3) in buckle.
• Return latch plate (1) to initial
position.
Operation:
The seat belt inertia reel stops the
belt from unwinding further in case
of vehicle deceleration or if the belt
is pulled out quickly.
Functional test:
The locking function of the inertia
reel can be tested by pulling the
belt out quickly.
Note:
No seat belt can be used for more
than one person. Belts are not
intended for children under the age
of six or under the weight of
23 kg/50 lb.
After an accident, inspect the seat
belts and replace them, if required.
The belt anchors in the vehicle
should also be checked.
Replace damaged belts immediately.
Belts must not be routed via sharp
edges.
No modifications which may affect
the efficiency of the belts must be
made.
For cleaning and care of belt webb­
ing, refer to page 54.
16