Electrical System
11
Securing screws fo r sealed-
beam unit retaining ring.
Loosen securing screws, re
move retaining ring and unit.
Puli off connector.
12 Securing screws fo r fog light
retaining ring. Loosen securing
screws and take out light body.
Pull off plug (13). Disengage
retaining spring and remove
bulb (14).
15
Bulb fo r turn signal, clearance
(standing) and side m arker
light. Loosen fastener (6). Push
light body forw ard and detach.
Hold lamp holder by the wide
lug and pull out. Depress bulb,
turn to the left and take out.
When installing the bulb holder,
the lugs must engage the light
body recesses. When installing
the light body, never fail to
engage the locating webs (16)
between the retaining springs
(17).
Tail Light Assembly
Remove both knurled nuts in the
trunk and pull off lens assembly.
To replace the bulbs, depress, turn
left and pull out.
1
Turn signal light
side m arker light
2 Standing lig h t/ta il light
3 Stop light
4
Back up light
i
67
Summary of Contents for 230 1978
