Seats
Safety Belts
W arning system:
The indicator marked “ FASTEN
SEAT BELTS” is illum inated for 4 - 8
seconds after turning the steering
lock key to position “ 2 ” . If the safety
belt of the d river’s seat is not
fastened a warning buzzer sounds
simultaneously.
Fastening of front and outer rear
seat belts (with inertia reel):
• Pull belt with tongue (1) across
shoulder and lap. The belt must
not be twisted and must be tight.
• Press tongue (1) into buckle (2)
and allow to engage audibly.
Unfastening, fron t and rear:
• Depress red button “ PRESS” (3)
in buckle (2).
• Return tongue (1) to initial
position.
Fastening of rear center seat belt
(without inertia reel):
• Pull belt across the lap. It must
not be twisted and must be tight.
• Press tongue into, buckle and
allow to engage audibly.
Adjustm ent of rear center seat belt:
To lengthen, turn belt buckle (on
LH side of belt) to be at right angles
to the belt and pull the tongue.
To shorten, pull loose end of belt.
16
Summary of Contents for 230 1978
