Mercedes-Benz 2010 R-Class, Operator'S Manual

Page: 318 / 364

X Place bulb socket
?
back into the housing
and turn it clockwise until it engages.
X
Align housing cover
:
and turn it
clockwise until it engages.
Front turn signal lamp bulb
X
Turn bulb socket
;
with the bulb
counterclockwise and remove it.
X
On both sides open catch
A
and pull bulb
B
out of bulb socket
;
.
X Gently press the new bulb into bulb
socket
;
.
X
Place bulb socket
;
back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
X
Turn bulb socket
:
with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket
:
.
X Gently press the new bulb into bulb
socket
:
.
X
Place bulb socket
:
back into the housing
and turn it clockwise until it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$
.
Tail lamp unit
To access the tail lamp units, you first have to
remove the cover in the corresponding side
trim panel of the cargo compartment.
X
Open the tailgate.
Opening the driver’s side trim panel
X
Insert a suitable object such as a coin into
the slot of lock
:
.
X
Turn lock
:
by 90° in direction of the
arrow.
X
Remove cover
;
.
316
Replacing bulbs
Practical hints
251_AKB; 4; 52, en-US
d2ureepe,
Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 316