Mercedes-Benz 2010 R-Class, Operator'S Manual

Page: 275 / 364

X
Removing: Open the tailgate (
Y
page 75).
X
Lift the cargo compartment floor and
secure it on the upper cargo compartment
lip (
Y
page 270).
! To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
X
Remove the jack from the vehicle tool kit
(
Y
page 271).
X
Remove retaining screw
:
by turning it
counterclockwise.
i If retaining screw
:
does not come
loose, turn storage well casing
=
slightly
counterclockwise. Retaining screw
:
should then come loose easily.
X
Turn storage well casing
=
by
approximately 180°.
The electric air pump (
Y
page 271) points
towards the rear.
X Remove storage well casing
=
.
X
Remove spare wheel
;
.
For information on mounting the spare wheel,
see “Flat tire” (
Y
page 319).
Storing the spare wheel after use
There are two guide pins in the spare wheel
well that serve to hold the spare wheel in
place.
X
Place the spare wheel into the spare wheel
well.
X
Make sure the spare wheel is placed
precisely on guide pins
:
.
X
Place storage well casing
=
(
Y
page 273)
into the spare wheel.
The electric air pump (
Y
page 271) must
point to the rear.
X Turn storage well casing
=
(
Y
page 273)
by approximately 180°.
The electric air pump (
Y
page 271) points
in direction of travel.
i The storage well casing should now be
positioned according to the mounting
direction indicators (
Y
page 271).
X Secure the spare wheel by turning retaining
screw
:
(
Y
page 273) clockwise.
X
Place the jack into the vehicle tool kit
(
Y
page 271).
Where will I find ...?
273
Practical hints
251_AKB; 4; 52, en-US
d2ureepe,
Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 273
Z