Mercedes-Benz 2007 E -Class Wagon, Operator'S Manual

Page: 193 / 514

192
Controls in detail
Automatic transmission
Gear ranges
With the gear selector lever in drive
position
D and driving in program mode C
or S (
컄
page 193), you can select a gear
range for the automatic transmission to
operate within.
Gear selector lever (
컄
page 194):
You can limit the gear range by pressing
the gear selector lever to the left (
D- ), and
reverse the gear range limit by pressing
the gear selector lever to the right (
D+ ).
Steering wheel gearshift control
(E 63 AMG only) (
컄
page 195):
You can limit the gear range by pulling the
left gearshift paddle on the steering wheel
gearshift control, and reverse the gear
range limit by pulling the right gearshift
paddle on the steering wheel gearshift
control.
The selected gear range appears in the
multifunction display.
1
Current gear range
Effect
ï
The transmission shifts through
sixth gear only (applies to
vehicles with 7-speed automatic
transmission only).
î
The transmission shifts through
fifth gear only (applies to
vehicles with 7-speed automatic
transmission only).
Effect
é
The transmission shifts through
fourth gear only.
è
The transmission shifts through
third gear only.
With this selection you can use
the braking effect of the engine.
ç
The transmission shifts through
second gear only.
Allows the use of engine’s
braking power when driving
앫
on steep downgrades
앫
in mountainous regions
앫
under extreme operating
conditions
æ
The transmission operates in
first gear only.
For maximum use of engine’s
braking effect on very steep or
lengthy downgrades.