Mercedes-Benz 2007 E -Class Wagon, Operator'S Manual

Page: 186 / 514

185
Controls in detail
Control system
You can use the functions in the Tel menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
왘
Switch on the telephone and COMAND.
왘
Press button
ÿ
or
è
on the
steering wheel repeatedly until the Tel
menu appears in the multifunction dis-
play.
Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:
앫
If the telephone is off, the message in
the multifunction display is:
TEL off .
앫
If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network,
READY appears in the multi-
function display.
This standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the message, or if available, the caller ID
(number and name):
왘
Press button
s
.
You have answered the call. In the mul-
tifunction display you see the length of
the call.
Ending a call
왘
Press button
t
.
You have ended the call. In the multi-
function display you will again see the
standby message.
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or serious
personal injury.
i
If you do not wish to accept a call, press
button
t
.