Mercedes-Benz 2007 E -Class Wagon, Operator'S Manual

Page: 445 / 514

444
Practical hints
Replacing bulbs
Notes on bulb replacement
앫
Only use 12-volt bulbs of the same type
and with the specified watt rating.
앫
Switch lights off before changing a bulb
to prevent short circuits.
앫
Always use a clean lint-free cloth when
handling bulbs.
앫
Your hands should be dry and free of oil
and grease.
앫
If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Center.
앫
Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center:
앫
Additional turn signals in the exteri-
or rear view mirrors
앫
High mounted brake lamp
앫
Bi-Xenon* lamps
앫
Front fog lamps
앫
Rear lamps (except license plate
lamps)
앫
Front side marker lamps
Replacing bulbs for front lamps
1
Housing cover for low beam halogen or
Bi-Xenon* headlamp
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
Warning!
G
Do not remove the cover
1
for the
Bi-Xenon* headlamp. Because of high
voltage in Bi-Xenon* lamps, it is dangerous
to replace the bulb or repair the lamp and its
components. We recommend that you have
such work done by a qualified technician.