¾
8.
9.
10.
11.
a.
b.
AUDIO 20 equipped vehicles:
Find the MOST coupling (A, Figure 14) in the
looped optical fiber taped to the bottom, right
of the equipment carrier.
Remove the tape (B, Figure 14) to free up
the MOST optical fiber.
Disassemble the MOST coupling and
carefully remove the fiber end (Arrow, Figure
14).
Install the MOST adapter cable:
Insert the fiber end (B, Figure 10) of the
MOST adapter cable into the vacant
chamber (A, Figure 14) of the
disassembled MOST coupling and
reassemble the coupling.
Insert the fiber end removed of the
MOST coupling (Arrow, Figure 14) into
the vacant chamber of the MOST
adapter connector (C, Figure 10).
Figure 14
P82.70-xxxx-71
F. Installing the MHI control module/antenna switch bracket assembly and connecting the MHI
control module and antenna switch
1. Loosen the four E8 inverted Torx screws
securing the Tele Aid control module to the
right side of the equipment carrier.
2. Slide the screw slots in the bottom of the
bracket for the MHI control module and
antenna switch over the screws loosened in
step 1, slide the bracket assembly forward
until it hits the screws, and then tighten the
screws to secure the bracket assembly
(Figure 15).
Figure 15
P82.70-xxxx-71
PRELIMINARY DRAFT
November 2004
7
