J. Version coding
1. Connect Star Diagnosis to the vehicle and perform the version coding below.
2. Set the MOST ring configuration to match Figure 30 via path:
Control units > Information and communication > Audio, video, navigation and telematics >
AGW – Audio Gateway > Retrofitting of MOST components > F2: Restart of optical ring > F2:
Actual configuration > Verify that “Telecommunications” is listed under Actual Value and
configuration of the MOST components matches Figure 30 > F2: To continue > F3: Yes, to write
the current actual configuration to MOST master > F2: Erase fault memory
Note
: The MOST ring configuration in Figure 30 is an example of a configuration including every
component. Some installations will not include all the components shown in the example. If a
component is not present, connect the preceding component to the component following the one not
present.
NOTICE!
Failure to have the configuration match Figure 30 will result in erroneous system operation
and/or intermittent malfunctioning of some or all components.
DO NOT alter the configuration in Figure 30 to match the vehicle configuration.
3. Set the Tele Aid control module to recognize presence of the telephone using path:
Control units > Information and communication > Audio, video, navigation and telematics >
TELE-AID > Control unit adaptations > Model series, telephone adapter for portable CTEL (UHI) >
Set “Model series” to R171, Set “Telephone adapter” to FITTED, press F5 > F3: Yes/Coding > F2
to confirm the coding was carried out
4. Set the instrument cluster to recognize presence of the cellular telephone, VCS, and Tele Aid using
path:
Control units > Information and communication > ICM > Control unit adaptations > Version
coding > Optional equipment > Select “CTEL cellular telephone” > Set “CTEL cellular telephone”
to PRESENT, then press F3 > F5: To save changes > F3: To transfer coding to control unit
5. Check the DTC memory of all installed components and the head unit. Investigate and identify any
present DTC(s). Once identified, correct the source of the DTC(s) and clear the DTC memory.
Note:
Powering up the newly installed system prior to version coding will set errors in the MOST ring
configuration. Ignore these errors during the initial DTC check. If, after clearing the DTC(s), they return
in the next step, a configuration error is present. Locate and correct the error.
6. Confirm no new DTC(s) are present in the MOST system group.
PRELIMINARY DRAFT
November 2004
13
