2. On the right side of the equipment carrier,
disconnect the Tele Aid leads (A and B,
Figure 3) from one another and identify the:
•
Tele Aid FAKRA female, white connector
(A, Figure 3)
•
•
•
•
Main antenna FAKRA male, white
connector (B, Figure 3)
3. On the right side of the equipment carrier,
identify the:
Telephone FAKRA female, black
connector (C, Figure 3)
Antenna switch 2-pin power supply
connector (D, Figure 3)
Linear compensator 4-pin power supply
connector (E, Figure 3)
Figure 3
P82.70-xxxx-71
4. On the right side of the equipment carrier,
identify the:
•
•
MHI power supply connector (A, Figure
4)
MHI microphone array connector (B,
Figure 4)
Figure 4
P82.70-xxxx-71
5. Along the bottom, center of the equipment
carrier, find the coupled antenna leads (A
and B, Figure 5) and carefully cut the wire tie
to release them.
6. Disconnect the antenna connectors (A and
B, Figure 5) from one another and identify
the:
•
•
Antenna FAKRA female, black connector
(A, Figure 5)
Antenna FAKRA male, black connector
(B, Figure 5)
Figure 5
P82.70-xxxx-71
PRELIMINARY DRAFT
November 2004
3
