Base with high-low function
The base has individual brakes on each castor, as well
as built-in adjustment for seat height and tilt, see Figure
5.44. Seat height (A) and seat tilt (B) are adjusted with
pedals at the rear edge of the base, see Figure 5.45.
The pedals also have an integrated locking function,
see Figure 5.46.
Seat height adjustment:
1. Hold down the left pedal and pull the seat up or down
to the desired height.
2. Release the pedal to lock the position.
Activation and deactivation of brake:
1. Press the pedal on the link wheel down to brake.
Each castor is braked separately.
2. Press the pedal on the link wheel up to release the
brake.
Seat tilt adjustment:
1. Hold down the right pedal and tilt the seat to the
desired angle.
2. Release the pedal to lock the position.
Activation and deactivation of pedal locking function:
1. Turn the foot pedal control a quarter of a turn and
release so that the control is pulled to the locked
position.
2. Pull out the switch and turn a quarter turn to put the
control in the unlocked position.
Figure 5.44. Base with high-low function.
Figure 5.45. Foot pedals for adjusting seat
height and tilt.
Figure 5.46. Locking function for pedals.
32
Instructions for use for medical work chairs in the REAL 9000 PLUS device range
Configurations and settings
21-08742-EN-01
A
B
Summary of Contents for REAL 9000 PLUS Series
Page 2: ...Space for device label with serial number...
Page 60: ......
