5.6. Manual seat tilt
Manual seat tilt (optional) is available in three ranges: standard (15° forward, 8° backward),
reverse seat tilt (8° forward, 15° backward) and all seat tilt backwards (0° forward, 23°
backwards). If selecting the option of all seat tilt backwards (0° forwards, 23° backwards),
the device must be equipped with a base extender, see 5.13. Base. The device can also be
configured prepared for seat tilt with a fixed brace that fixes the seat tilt in a flat position (0°).
Manual seat tilt can be adjusted with the crank handle or gas spring lever. Height adjustment is
also available as an electrical function, see 5.3. Electrical functions.
Gas spring lever
The lever for the gas spring can be located on the left rear
edge of the seat or under the armrest, see Figure 5.15.
Adjustment:
1. Lift and hold the lever to disengage the gas spring,
adjust the seat tilt by moving your upper body weight
forwards and backwards until the desired position is
reached.
2. Release the lever to lock the seat tilt.
Figure 5.15. Gas spring lever for adjusting seat
tilt.
Crank handle
The crank handle is placed under the rear edge of the
seat, see Figure 5.16.
Adjustment:
1. Turn the control to the right to move the seat tilt
forwards.
2. Turn it to the left to move the seat tilt backwards.
Figure 5.16. Crank handle for adjusting seat tilt.
21
Instructions for use for medical work chairs in the REAL 9000 PLUS device range
Configurations and settings
21-08742-EN-01
Summary of Contents for REAL 9000 PLUS Series
Page 2: ...Space for device label with serial number...
Page 60: ......
