EN
72
Emission test
Compliance
Guidelines for electromagnetic environment
Radio frequency radiation
CISPR 11
Group 1
Radio frequency energy is only used in the product
for the internal functions in the product. The emit-
ted radio frequency radiation is therefore very low
and the probability of it causing interference in ne-
arby electronic equipment is low.
Radio frequency radiation
CISPR 11
Class B
Class B equipment can be used for domestic pur-
poses and in facilities directly connected to low vol-
tage networks in residential buildings.
Overtones IEC 61000-3-2
Not applicable
Voltage fluctuation/flicker
IEC 61000-3-3
Not applicable
GUIDELINES & MANUFACTURER’S CERTIFICATE CONCERNING
ELECTROMAGNETIC IMMUNITY
The product is intended to be used in electromagnetic environments in accordance with the
specifications below. It is incumbent on the customer or the person using the product to
ensure that the electromagnetic environment in which the product is used complies with these
specifications.
Immunity test
Test level as per IEC
60601
Compliance level
Guidelines for
electromagnetic environment
Electrostatic
discharge (ESD)
IEC 61000-4-2
±8 kV line carrier
± 2 kV, ± 4 kV, ±8 kV, ±
15 kV airborne
±8 kV line carrier
± 2 kV, ± 4 kV, ±8
kV, ± 15 kV air-
borne
The floor surface should consist
of wood, concrete or clinker. In
rooms with floors covered with
synthetic material the relative air
humidity should be at least 30%.
Electrostatic rapid
transient/burst
IEC 61000-4-4
±2 kV for power lines
± 1 kV for incoming
and outgoing lines
Not applicable
Overvoltage pulse
IEC 61000-4-5
± 1 kV differential
mode
± 2 kV common mode
Not applicable
Summary of Contents for 013697
Page 4: ...1 1 2 3 4 2 3 4 5 ...
