mensor DPG 2400, Operating Instructions Manual

Page: 20 / 36

20 Operating Instructions DPG 2400 Series
Digital Pressure Gauge
DPG 2400 Series
6.3.2 Password Entry Screen
If the calibration function is selected from the sensor setup screen, the password entry
screen will be displayed:
The 4-digit password can be entered by moving the
cursor with the left and right arrow keys under the
digit to be changed and then pressing the up or down
arrow keys to scroll through the numbers 0 to 9. When
the password is entered, press the
♦
(enter) key. The
calibration screen will be displayed.
6.3.3 Sensor Calibration Screen
The sensor calibration screen allows the zero and span to be adjusted, the calibration to
be reset to the factory defaults, and the calibration password to be changed.
A Calibration
Cal Zero Cal Span
Change PW Reset Cal
The items in the calibration menu perform the following functions when selected:
Cal Zero: Displays the currently measured pressure.
Adjust the digits to the true pressure applied to the
sensor and press the
♦
(enter) key to store the value.
For more details, see Section 8, Calibration.
Cal Span: Displays the measured pressure for the active sensor.
Adjust the digits to the true pressure applied to the
sensor and press the
♦
(enter) key to store the value.
For more details, see Section 8, Calibration.
Sensor A Calibration
Password Entry
Enter to Continue
A Calibration
Cal Zero Cal Span
Change PW Reset Cal
A Calibration
Cal Zero Cal Span
Change PW Reset Cal