
85-03-01060-D
FV44i Décor Gen 3
Page
21
3.2.8.1
Convection Blower System
Dual blowers are provided as standard equipment with this FV-44i Insert. The
dual blowers have an air output rating of 190 CFM (in free air). This Insert is
designed to operate with the blowers turned off or on. Turning the blower on
aids in distributing and circulating heat to the room this Insert is installed in.
3.2.8.2
Lifting Handles
Two lifting handles, one on each side, are provided. The lifting handles make it
easy for two individuals to lift and transport this Insert.
Note: Team lifting is recommended.
To use the lifting handles, remove two screws that secure the upper section of the
lifting handles and pull top section outward. Slide hands into the opening of the
lifting handle, grip top U-shaped section tightly and lift.
Once this Insert is moved to its final location, you may remove and discard the lifting
handles, if necessary, to reduce the width of this Insert.
Figure 3-22 Convection Blower System
50
Figure 3-23 Lifting Handles