47 |
P a g e
BEFORE YOU BEGIN
Read this entire manual before you use your new fireplace (especially the section “Safety Precautions” on page 2). Fail-
ure to follow the instructions may result in property damage, bodily injury, or even death.
Remote Control Transmitter Functions
NOTE
: The Wall Receiver will “beep” once every time
a Remote Transmitter Key is pressed, signaling that
the command has been received.
Identify the four function buttons on the Remote
Transmitter:
ON/OFF KEY
: This button turns the sys-
tem ON or OFF. When this button is
pressed and the system is OFF, the pilot
light will stay ON if the “Standing Pilot
Switch” is in the ON position.
THERMOSTAT KEY
: This button, when
pressed after the ON/OFF KEY is pressed and the system is ON, will allow the selection of three modes:
Manual Operation, Normal Thermostat and Smart Thermostat.
Manual Mode
: In this mode, the
room
temperature is ignored and the
fireplace can
be turned ON indefinitely. The room
temperature
rise has no effect on this mode. All other
functions such
as fan speed control, flame height control and
Accent Light
ON/OFF controls will be manually controllable.
Normal Thermostat
: In this mode, the fireplace
will stay
functioning until the room temperature
increases 1
o
F
above the Set Point Temperature. To increase
the Set Point
Temperature, Press the UP button until the
desired
temperature is displayed in the SET POINT
TEMPERATURE window. The fan will turn on 5
minutes after
fireplace startup and will turn off 12-1/2 minutes
after the
flames turn off, in this mode. The flame height
can be
adjusted while the fireplace is functioning, fan
speed can be
adjusted after 5 minutes of startup. The Accent
Light can be
turned on or off any time after startup.
Smart Thermostat
: In this mode, all other functions except the flame height adjustment are allowed. Manual flame height
adjustment is not allowed in this mode. The Smart Thermostat function adjusts the flame height in accordance to the dif-
ference between the set point temperature and the actual room temperature. As the room temperature gets closer to the
set point temperature, the Smart Function automatically modulates the flame down.
UP/DOWN KEY:
This key is used to increase or decrease the Set Point Temperatures, Flame Height and Fan Speed and
to toggle between Accent Light ON/OFF
.
MODE SELECTION KEY:
This key is used to toggle between the various function icons : Flame Height,
Fan Speed and Accent Light.
SMART
ON
OFF
SMART
MODE
NORMAL
THERMOSTAT
MANUAL
MODE
68
Hi
MAX
MAX
Hi
OFF
76°
F
F
76°
ON
SMART
76°
F
