20 |
P a g e
Final Finishing Material mounted behind the Grace Front, using the Inner Guides
:
If the Final Finishing Material is mounted behind the Grace Front and you wish the front visible faces of the Grace Front
and the Traditions or Willowbrook to be close to each other, you have one option:
1.
Remove the Glass Safety Screen that is integrated on the back surface of the Grace Front. Mount the Grace
Front inward as far back as allowed by the Final Finish Material thickness. Mount the Traditions or Willow-
brook Front at the desired depth relative to the Grace Front. Note that the Traditions or Willowbrook Front’s
visible face can be made flush with the Grace Front’s visible surface if the Final Finishing Material is less than
¾” and the Adjustable Framing Brackets are employed properly.
NON-COMBUSTIBLE FINISHING MATERIALS REQUIREMENTS
WARNING: The cross hatched areas labeled as “NONCOMBUSTIBLE ZONE” must be covered with noncombustible fin-
ishing materials that is 1-inch thick, minimum. DO NOT ALLOW COMBUSTIBLE MATERIALS TO ENCROACH IN THIS
AREA!
