23 of 28
5
6
1.
When a�aching a logstore to the Christon 550 or 750,
the first thing to do is to prepare the base by ensuring all
the bolts, as well as the front bar, have been separated
from the stand.
2.
Then place wooden batons on top of the base; this
enable the Christon stove to be placed onto the logstore
without trapping your fingers. Please observe safe li�ing
prac�ces and do not a�empt to li� this stove alone.
These batons should be 50mm (2 inches) thick to provide
enough space to access and remove the levelling feet.
The tool provided for adjus�ng the height of the feet can
also be used to remove the feet.
3.
Once the feet have been removed, roughly posi�on
the stove inline with the base. Then carefully li� one side
of the stove and remove the wooden batons, allowing
the stove to come to rest upon the logstore.
4.
It is unlikely that the stove body and logstore base are
perfectly aligned. The other end of the foot adjustment
tool can then be used to lever the two components on a
horizontal plane with the help of the purpose-built
alignment groves either side of the closed combus�on
inlet.
5.
Now the two are inline, the logstore can be secured
using the bolts provided. The front two bolts need to be
a�ached with the front cover strip (as shown in the
photo). These bolts should be fastened using an Alan key
to ensure that the stove is well secured to the base.
You have now successfully a�ached the logstore.
LOGSTORE INSTALLATION
1
2
3
4
