Getting Started
Page 19
2.3
Configuring the Hardware
Check your hardware requirements before mounting the MH70S. Modifications are
difficult or impossible to do when the MH70S is mounted.
2.3.1
Installing an HDD/SSD
Perform the following steps before installing the HDDs/SSDs:
»
Power down your system.
»
Remove the carrier board from the system.
»
If there are already HDDs/SSDs installed:
Installing the first HDD/SSD:
»
Place the first HDD/SSD in the slot close to the front panel on the carrier board and
align it with the guide rails.
»
Align the SATA connector on the HDD/SSD with the SATA connector on the carrier
board.
»
Firmly plug the HDD/SSD into the SATA connector on the carrier board.
MEN offers suitable accessory articles for MH70S.
See the MEN website for ordering information:
www.men.de/products/mh70s/#ord
