Memotec CX900e, Hardware Reference Manual, Page: 39 / 200

2 CHASSIS
3006M100-002
2-5
Console Port
The rear panel has a female RJ-11 connector labeled CONSOLE for the console
port. You can access the CX900e controlling software by attaching a terminal or a
PC running an asynchronous emulation software directly to this connector with
the RJ-11 (male) to DB-9 (female) cable shipped with the unit.
The asynchronous parameters for the console port are factory-set. The PC serial
port parameters should be set to match:
Character Length: 8 bits/characte
Stop Bits: 1 bit/character
Parity: None
Speed: 9600 bps
Flow Control: Xon/Xoff
Power Entry
The rear panel has a power entry module through which power enters the CX900e
and goes to the power supply unit.
The power entry module consists of:
• a male connector for a standard IEC three-lead power cord
• a bank of two fuses (0.4A 250V time-delay fuses for 200-240V or 0.8A 250V time-
delay fuses for 100-127V) accessed with a screwdriver
WARNING: This equipment uses double pole/neutral fusing. For continued protec-
tion against risk of fire, replace only with the same type and rating of
fuses.