Universal E-stop System Quick Start Guide
8
Universal E-stop Bypass Operation
You can bypass the Universal E-stop system temporarily for
troubleshooting a fault in the system or to move the arm when Flair PC is
not connected for example to move the arm in transport position. To do
so, connect the Bypass E-stop button via E-stop Robot Cable in the
umbilical to the Robot Controller.
To Robot
Controller
Bypass E-stop
button
[20529]
E-stop Robot Cable via
Umbilical
Bypassing the Universal E-stop System is for temporary use
only. Robot will enable as soon as E-stop button is reset.
This will also bypass the software E-stop and any other
hardware E-stops and the robot will have no controlled
E-stop action.