Natural Gas Conversion for Model# 720-0839
Sear Side Burner Conversion
Tools required:
Phillips Head Screwdriver (+)
6 mm Nut Driver
The step-by-
step instruction for converting the sear side burner’s orifice are stated below.
1.
Remove the screw under C bracket to take off the C bracket, then remove 2 screws at each corner of the
searing side burner and one screw for igniter.
2.
Remove the searing side burner LP (Liquid Propane) orifice with 6mm driver
,
then
Replace the NG
(Natural Gas) orifice to the connector by hand from beneath of side burner, then replace the side burner
to the original position, tighten screws for all corners.
30