Memak Rota 507, Installation And User Manual

Page: 46 / 48

46
I
memak.com
If the aspirator is
out of order.
There can be no electricity. Check the power cables.
There can be loose contact on electricity
circuit.
Check electrical connection.
Connections can be faulty after
maintenance procedures.
Check the connections, correct if
there is a fault.
Pipe, tube or aspirator can be
congested.
Check pipe, tube and aspirator and
clean if there are foreign matters.
There can be aspirator motor fault.
Correct if there is any loose contact
with the coil circuit.
Propeller can be displaced, connect
it.
If the display
temperature is
faulty.
If thermocouples are not properly
placed.
Place the thermocouple to its slot
and ensure its connection done.
Thermocouple can be damaged. Replace thermocouple.
Electronic panel can be damaged. Check the electrical panel.
If the burner is not
running regularly
Irregular circulation.
Check the circulation and remove
if there is congestion or parts
hindering burner operation.
Oil flow rate can be insufficient.
Check burner fuel support circuit
and contact with the fuel supplier if
necessary.
Settings and arrangements can be
insufficient.
See burner’s user’s manual.
If burner is out of
order
Burner may leak gas
See burner user’s manual or seek
for technical support from its
manufacturer.
It may not transfer fuel. Check burner fuel support circuit.
Safety thermostat can be too low.
Check whether correct temperature
values sets.
There can be faulty thermostat service.
Ensure thermostat return to normal
settings.
Burner equipment can be faulty.
See burner’s user’s manual or
seek for technical support from its
manufacturer.
If the compartment
lighting is not
functional
If the bulb is blown
Replace the bulb.
Use correct power and voltage value.
If lamp socket connection is not
correctly made.
Check socket electrical connection.
Repair the control panel