manualshive.com logo in svg

Meltem 730000, Installation Manual

Share
Download
Meltem 730000 Installation Manual Download Page 18

Installation manual 

Outer wall terminals M-WRG-II ES (-P, -PK), M-WRG-II KSR (-1, -2)

- 18 -

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION  THE  RIGHT WAY

V E N T I L A T I O N   &   H E A T   R E C O V E R Y

7 

Cleaning and care instructions

7.1 

Stainless steel outer wall terminals (M-WRG-II ES)

NOTICE

The thin and transparent passive coating on the surface protects the stainless steel 

against corrosion. However, dust and other soiling from the atmosphere can still be 

deposited on the surface, causing flash rusting.

 

► Do not remove the protective film from the outer wall terminals until the installation is 

complete.

 

►

Remove all adhesive residues that remain on the outer wall terminals when you 

remove the protective film.

 

►

Clean the outer wall terminals after installation using a soft, lint-free cloth and stain-

less steel cleaner.

 

► Remove any flash rust that is already present using a soft, lint-free cloth and stainless 

steel cleaner.

NOTICE

Corrosion caused by flash rust is not covered by the warranty.

 

► Immediately remove particles of iron, metal filings, plaster and swarf from the surface 

of the outer wall terminals.

 

►

Remove lime and cement spatter as quickly as possible and before it hardens from 

the surface of the outer wall terminals.

 

►

Do not use abrasive cleaning utensils (pan scourers, steel wool, etc.) and do not use 

cleaning agents containing chlorine or hydrochloric acid.

7.2 

Powder-coated outer wall terminals (M-WRG-II ES-P, M-WRG-II ES-PK)

 

►

Clean the outer wall terminals after installation using a soft, lint-free cloth and mild 

soapy water.

 

► Immediately remove particles of iron, metal filings, plaster and swarf from the surface 

of the outer wall terminals.

 

►

Remove lime and cement spatter as quickly as possible and before it hardens from 

the surface of the outer wall terminals.

 

►

Do not use abrasive cleaning utensils (pan scourers, steel wool, etc.).

7.3 

Outer wall terminal plastic pipe set (M-WRG-II KSR)

 

►

Clean the outer wall terminals using a soft, lint-free cloth and mild soapy water.

Summary of Contents for 730000





















Reviews:

No comments

Brands by name

Popular brands

Load more brands