-Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
-Do not use the appliance on any part of the
body of a person or animal.
-Do not use the appliance with pets or animals.
-Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
-Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
-Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer’s liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
-Remove the appliance’s protective film.
-Prepare the appliance according to the function
you wish to use.
FILLING WITH WATER:
-It is essential to have filled the deposit with
water to be able to work with steam.
-Fill the tank through the filling hole (A).
-Fill the deposit taking care to observe the MAX
level (Fig. 2).
USE:
-Uncoil the cable completely and lift the handle
before plugging it in.
-Fill the deposit taking care to observe the MAX
level (Fig. 2)
-Connect the appliance to the mains. (Fig. 3)
-Switch the appliance on (On/off) (L) , setting
the temperature and steam control (E) to the
position that corresponds to the desired tem-
perature. (Fig. 2 and 4)
-The indicator lamps (B), (J) and (K) will light up
(Fig. 3 and 5)
-During the heating process, and depending on
the setting, the ECO or MAX indicator will flash
until the steamer reaches temperature, once
this happens the indicator will remain constant,
indicating that it is fully ready to iron. This
process takes about 60” and is controlled by
the product’s electronics.
-Do not use temperatures higher than those
indicated on the garments to be treated.
-● Temperature for synthetic fibres (Polyester,
Nylon…).
-●● Temperature for silk, wool. (Minimum tem-
perature for ironing with steam)
-●●● Temperature for cotton.
-Max Temperature for linen.
-If garment has various kinds of fibres, select
the temperature for the fibre that requires the
lowest temperature. (For example, select the
temperature for polyester for an article made
out of 60% polyester and 40% cotton).
-Wait until the pilot light (B) has gone out which
will indicate that the appliance has reached an
adequate temperature.
-Press and hold the steam button (C) for 10
seconds
-During use the pilot light (B) will automatically
flash on and off, thus indicating that the heating
elements are operating in order to maintain the
desired temperature.
DRY IRONING:
-The appliance has a steam and temperature
control (E) which when set to the MIN position
allows dry ironing (no steam).
STEAM IRONING:
-It is possible to iron with steam whenever the
deposit is filled with water and the adequate
temperature is selected.
STEAM FLOW CONTROL:
-The appliance allows the temperature (E) and
steam flow (L) to be regulated, to adjust the
steam use ECO for reduced power consump-
tion while still maintaining ironing quality or
MAX for maximum steam flow.
VERTICAL STEAMING
-It is possible to iron hanging curtains, items of
clothing on his hanger, etc. To do so, follow the
instructions:
-Select the maximum temperature of the iron,
while turning the temperature regulator of the
iron in a clockwise direction.
-Move the iron in a top to bottom direction while
pressing the steam control ( C ). Important:
for cotton and linen, its recommended to put
the iron base in contact with the material. For
other more delicated fibres, it's recommended
to keep the iron base at some centimetres of
distance.
