SwitchX Switch EVB Hardware User Manual
Rev 1.5
Mellanox Technologies
51
3. Login (from a serial terminal program) as
root
and use
root
as password. This starts the Mel-
lanox configuration wizard.
4. Before attempting a remote (for example, SSH) connection to the switch, check the mgmt0
interface configuration. Specifically, verify the existence of an IP address. To check the cur-
rent mgmt0 configuration, enter the following commands:
The following is an example of the output:
Parity
None
Flow Control
None
sx-43 [standalone: master] > enable
sx-43 [standalone: master] # show interfaces mgmt0
Interface mgmt0 state
Admin up: yes
Link up: yes
IP address: 192.168.10.43
Netmask: 255.255.255.0
Speed: 1000Mb/s (auto)
Duplex: full (auto)
Interface type: ethernet
Interface source: physical
MTU: 1500
HW address: 00:02:C9:11:2A:AE
Comment:
RX bytes: 1343502058 TX bytes: 313920869
RX packets: 17589211 TX packets: 992717
RX mcast packets: 0 TX discards: 0
RX discards: 0 TX errors: 0
RX errors: 0 TX overruns: 0
RX overruns: 0 TX carrier: 0
RX frame: 0 TX collisions: 0
TX queue len: 1000
Table 8 - Serial Terminal Program Configuration (Continued)
Parameter
Setting
