Grid Director 4036/2036 Installation Manual
61
Assembly in an iDataPlex Rack
Figure 48: 4036/2036 – Assembly in an iDataplex Rack
NOTE:
Standard rack clip nuts and rack screws are not provided.
To mount the 4036/2036 in an iDataplex rack
1.
Put the chassis on a flat surface.
2.
On each side of the switch, attach the
mount brackets
to the
rear
of the chassis (connector
side) using two 8-32x1/4" pan head Philips screws.
Figure 49: Attaching the mount bracket
3.
On each side of the switch, connect the
mount holders
on the
front
side of the switch
using two 8-32x1/4" pan head Philips screws.
