Grid Director 4036/2036 Installation Manual
17
Component
4036 /2036 No.
of components
Function
Reset Button
1
When pressed for more than 1 second, resets the entire unit.
LEDs (Status Indicators)
5
System Power – Chassis power OK LED - ON/OFF
Info LED – User-defined LED for management use. Sets
the Info LED on a desired module. When you enable this
LED through the GUI or CLI, you can go on site and
immediately physically locate the module.
SM – Subnet Management (active or standby)
Fan Unit – Fan indication. Turns off as a result of fan
failure
Power Supply – Power indication. Turns off as a result
the failure of the power supply unit
3.2
Rear Panel Description
This section details the rear panel of a 4036/2036 chassis.
1.
36 InfiniBand QDR (Quad Data Rate) ports using standard QSFP InfiniBand Connectors
and LEDs supporting copper, active copper or optical cables.
2.
CLI (RS-232) DB9 Connector
3.
Reset Button
4.
LEDs
PWR LED
Info LED
PS/FAN LED
SM LED
5.
USB Connector
6.
Gigabit Ethernet auto-negotiating RJ45 Connector for management
1Gbps/100Mbps/10Mbps (& LED)
7.
ID Tab
NOTE:
Port #1 is located at the bottom left hand side of the rear panel, Port #36 at the top
right hand side.
