Cabling
54
This kit contains the Mng cable and the following adaptors:
RJ45 to RJ45 cable
A RJ45 to DB-9 cross-adaptor for RS-232 console connection (CLI). (The DB-9 adaptor
has a number 26 printed on it. This means that pins 2 and 6 are crossed).
A RJ45 to DB-9 adaptor for RS-232 console connection
IMPORTANT:
Both serial and Ethernet management ports of a 4036/2036 switch can
be connected simultaneously. However, the Ethernet ports of the front and the rear panels
cannot be connected simultaneously.
To connect multi-purpose cable of a 4036/2036 switch:
1.
Connect the DB-9 connector and the RJ45 connector to each extremity of the multipurpose
console cable (Mng).
2.
Connect the DB-9 connector to the 4036/2036 switch CLI port.
3.
Connect the RJ45 connector to the Ethernet port either on the rear panel or on the front
panel (but not to both).
Chapter 7
