Grid Director 4036/2036 Installation Manual
45
Note:
Rack clip nuts are not provided by Mellanox.
Figure 33: Placing the clip nuts on the vertical rack rails
6.
Go to the front of the rack.
Note: For ease of installation, at least two qualified people should perform the
following steps.
Lift and position the switch with the connectors facing towards you and insert it into the
rack.
Figure 34: Insert the switch into the rack
7.
Align the short bracket holes with the rack holes of the correct U level and secure them
using two rack screws on each side (not provided by Mellanox).
Figure 35: Secure the rack screws
8.
Go to the rear of the rack.
