10
into the appliance. This removes any air bubbles
which may possibly have formed during filling.
• During brewing, the water is heated and flows via
the rotating outlet onto the coffee powder
.
Different brewing profiles are stored in the appliance
for the different preparation quantities of 2 to 8
cups. Depending on the quantity of water filled, the
rotation directions and times are adapted so that the
coffee powder is always dampened in an optimum
way.
Note
: It is also possible to manually control the
direction and time of the rotation during brewing
(see “3.3 Manual extraction control”).
• You will hear a brief signal sound at the end of
preparation. The BREW button will now light up
continuously to indicate the warm-keeping phase.
• The keep-warm plate will keep the coffee hot and
then switch off automatically after 40 minutes to
avoid unnecessary power consumption. You can, of
course, switch off the appliance manually at any time
by pressing the BREW button longer (>
1
sec.).
• The drip stop on the filter holder prevents coffee
continuing to drip when you remove the jug from
the appliance.
• The removable filter holder allows you to dispose of
the filter paper easily and trouble-free.
3.3 Manual extraction control
• Manual extraction control is possible after the outlet
starts to rotate
• A long press (>
1
sec.) of the CONTROL button
switches on manual extraction control. The button lights
up.
• Pressing the CONTROL button briefly (<
1
sec.) allows
you to then change the rotation direction of the outlet
manually. You can change the direction of rotation as
many times as you want.
• The manual extraction control is ended again by pressing
the CONTROL button longer (>
1
sec.). The extraction
control is automatic again.
3.4 Using a custom brewing profile
(“Barista Mode”)
The brewing profiles stored for the preparation
quantities or number of cups are suitable for preparing
numerous different types of coffee. Furthermore, the
manual extraction control described in “3.3” allows
the rotation direction and time to be also changed.
This change does not affect the stored brewing
profiles.
You can, however, create
one
custom brewing profile
for
a specific number
of cups, store it and call it up
again later
• First fill the appliance with the required quantity of
water and coffee.
• Activate the appliance with a long press (>
1
sec.) on
the BREW button. The BREW button starts to flash
rapidly.
• Pressing the BREW and CONTROL buttons simulta-
neously for longer starts brewing to store a custom
brewing profile (“Barista Mode”). The BREW and
CONTROL buttons will start flashing rapidly at the
same time and the outlet will start to rotate.
Important:
If a custom brewing profile has previ-
ously been stored, it will be deleted by this process.
• You can now control the damping of the coffee
powder yourself by pressing the CONTROL button
briefly (<
1
sec.) to change the direction of rotation.
• If necessary, you can also program a blooming pause.
Briefly pressing (<
1
sec.) the PRE-BREW button
interrupts the brewing process and pressing the
PRE-BREW button again restarts it. You can now
continue controlling the brewing process again with
the CONTROL button.
• If the water tank is empty, the heater will switch off
and the BREW button will light up continuously. At
the same time, the CONTROL button will start to
flash for 20 seconds. Pressing the CONTROL button
for longer (>
1
sec.) within the 20 seconds stores the
custom brewing profile.
• If you want to call up the stored custom brewing
profile at a later time, first activate the appliance as
usual by pressing the BREW button longer (>
1
sec.).
The BREW button starts to flash rapidly. Pressing
the CONTROL button for longer (>
1
sec.) calls up
the custom brewing profile. The CONTROL button
will now also start to flash rapidly.
• Brewing is started with a short press (<
1
sec.) of
the BREW button. The BREW and the CONTROL
button both start to flash slowly.
•
Final note
: You can cancel the creation of an individual
brewing profile in “Barista Mode” by simultaneously
pressing the BREW and CONTROL buttons for
longer.
4. Warm-keeping/automatic switch-off
The taste of coffee changes when it is kept warm for
longer periods. To prevent this, you should enjoy your
coffee as fresh as possible immediately after brewing.
Furthermore, unnecessarily keeping the coffee warm
costs valuable energy.
If you still want to keep the coffee warm, the appliance
will automatically switch off 40 minutes after the
brewing process ends.
The BREW button is lit up continuously during warm-
keeping. You can also switch off the keep-warm plate
manually by pressing the BREW button longer (>
1
sec.).
If the appliance is not used, it will switch off automatically
after 5 minutes.
You can then activate the appliance again by pressing the
BREW button (>
1
sec.).
5. Descaling
Limescale in the appliance increases with each brewing
process depending on the hardness of the water that
is used. This is indicated by the CALC display
lighting up red. The appliance should be descaled at re-
gular intervals or, at the latest, when the CALC display
lights up. Please use a commercially available descaling
agent to do this.
We recommend using Melitta
®
“Anti Calc Liquid for
Filter Coffee & Aqua Machines“.
5.1 Descaling process
• Prepare the descaling fluid as specified by the manu-
facturer and pour it into the water tank.
• Place the jug on the keep-warm plate and place the
filter holder in the intended position underneath the
outlet.
• Activate the appliance by pressing the BREW button
longer (>
1
sec.) as for coffee preparation.
GB
