Melitta CI Touch, Operating Instructions Manual

Page: 47 / 306

Care and maintenance
47
GB
9.5 "Cleaning milk system"
programme
This programme is used to clean the milk
system with the aid of a milk system clean-
ing agent.
To maintain hygiene and avoid damage
to the appliance, we recommend carrying
out the cleaning programme once a week.
The cleaning programme takes approx-
imately 3 minutes and should not be
interrupted.
ATTENTION
The use of unsuitable milk system clean-
ing agents can damage the appliance.
ƒ
Only use Melitta® PERFECT CLEAN milk
system cleaning agent for fully auto-
matic coffee makers.
ƒ
Observe the processing instructions
on the packaging of the milk system
cleaning agent.
Requirement: The appliance is ready for
operation.
1. Place a container (0.7 l) beneath the
coffee spout (e.g. the coffee grounds
container).
2. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk
system menu.
4. Select Start and confirm your selection.
5. Follow the further instructions on the
display up to the end of the Cleaning
milk system programme .
Cleaning the milk unit
In addition, we recommend cleaning the
milk unit, the milk hose and the milk con-
tainer regularly.
Information
ū The plastic milk container, without lid
and riser pipe, is dishwasher-safe.
8
Fig. 16: Access to the milk unit
35
36
Fig. 17: Removing the milk unit
1. Pull the milk hose off the appliance.
2. Open the door of the spout
(8)
.
3. Pull the milk unit
(36)
off downwards.
4. Clean the individual parts with warm
water. Use a soft, damp cloth and nor-
mal washing up liquid for this.
Installation is carried out as described in
reverse order.
Information
Make sure that the milk unit is pushed
upwards to the end stop.
Mel_009_CI_Touch_20_de--kr_druck.indb 47 14.09.2018 13:51:40