Melitta Caffeo Solo & MilkE 953-10x, Operating Instructions Manual, Page: 148 / 154

146
→
Water will flow intermittently out of the steam pipe into the coffee
grounds container. The symbol for the valve flashes during this
process. This process lasts approximately 10 minutes. Subsequent-
ly, the symbol for the drip tray illuminates.
10 Leave the valve open.
11 Empty the coffee grounds container and the drip tray and then
reinsert the drip tray. Place the coffee grounds container back
under the steam pipe.
→
The symbol for the water tank illuminates.
12 Thoroughly rinse the water tank, fill it to the max. mark with fresh
tap water and reinsert it.
13 Press the button for steam dispensing to continue with the
integrated descaling programme.
→
Water flows out of the steam pipe into the coffee grounds container.
The symbol for the valve flashes during this process. Then the
valve symbol illuminates.
→
Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols are shown on the display.
14 Turn the valve switch anti-clockwise to the stop to close the val-
ve.
→
Water flows inside the appliance into the drip tray. Subsequently,
the symbol for the drip tray illuminates.
15 Empty the drip tray and the coffee grounds container and then
reinsert them.
→
The standby symbol illuminates after a brief heat-up phase.
The appliance is ready for operation.
16 Reinsert the Melitta
®
Claris
®
water filter into the water tank.