Melitta Caffeo Solo & MilkE 953-10x, Operating Instructions Manual, Page: 133 / 154

131
ENGLISH
10 Dispensing hot water
Prerequisite: The appliance must be ready for operation (see „Swit-
ching on and off“ on page 123).
•
Push the chrome-plated outer casing of the steam pipe upwards
(Fig. K, no. 2).
•
Hold a vessel under the steam pipe.
Warning!
There is a risk of burn injuries and scalding due to the hot water
splashing and the hot steam pipe.
When dispensing hot water directly after dispensing steam, the
remaining steam will initially escape from the steam pipe and
can cause the hot water to splash.
– Avoid direct skin contact with hot water and the hot steam pipe.
• Turn the valve switch (Fig. A, no. 11) clockwise to the stop to
open the valve.
→
The valve symbol flashes. Hot water flows out of the steam pipe
and into the vessel.
• As soon as the desired quantity of water is reached, turn the val-
ve switch anti-clockwise to the stop to close the valve.
Note
The dispensing of hot water stops automatically when reaching a
volume of approx. 150 ml. If you want to dispense more hot water,
please turn the valve switch off and on again.