Melitta Caffeo Solo & MilkE 953-10x, Operating Instructions Manual, Page: 131 / 154

129
ENGLISH
9 Heating milk
Prerequisite: The appliance must be ready for operation (see „Swit-
ching on and off“ on page 123).
•
Push the chrome-plated outer casing of the steam pipe upwards
(Fig. K, no. 2).
•
Hold the vessel containing the milk under the steam pipe. Ensure
that the tip of the steam pipe is immersed in the milk.
• Press the button for steam dispensing .
→
The standby symbol is flashing. The appliance heats up. Then
the valve symbol illuminates.
Warning!
There is a risk of burn injuries and scalding due to the hot steam
and the hot steam pipe.
–
Never reach into the escaping steam.
– Never touch the steam pipe during use or immediately after
use.
•
Turn the valve switch (Fig. A, no. 11) clockwise to the stop to
open the valve.
→
The valve symbol flashes. Hot steam coming out of the steam
pipe will heat the milk. You will achieve better results if you move
the vessel with milk up and down while heating.
• As soon as the desired milk temperature is reached, turn the
valve switch anti-clockwise to the stop to close the valve and end
the heating process.
•
Rinsing the steam pipe:
Fill a vessel halfway with clean water and hold the vessel under
the steam pipe.