Melitta Caffeo Barista TS, Operating Instructions Manual, Page: 99 / 256

Problems
99
ENGLISH
10 Problems
If the actions listed below fail to rectify the problems or other problems not
listed here occur, contact our hotline (local rate).
United Kingdom: +44 (0)800/ 0288 002
Problem Cause Action
Coffee only emerges
from the outlet in
drips.
Grinding fineness
too fine.
ƒ
Set a coarser grinding fineness (see
chapter 8.8 on page 88).
Appliance soiled.
ƒ
Clean the brewing unit (see chap-
ter 9.3 on page 91).
ƒ
Run the cleaning programme (see
chapter 9.6 on page 94).
Appliance calcified.
ƒ
Descale the appliance (see chap-
ter 9.7 on page 95).
Coffee does not flow. Water tank not filled
or inserted incor-
rectly.
ƒ
Fill the water tank and ensure it is
positioned correctly (see chap-
ter 4.6 on page 69).
Brewing unit
clogged.
ƒ
Clean the brewing unit (see chap-
ter 9.3 on page 91).
Fill beans appears on
the display although
the bean container
is filled.
Beans do not drop
into the grinder.
ƒ
Tap lightly on the bean container.
ƒ
Clean the bean container.
ƒ
Coffee beans too oily. Use different
coffee beans.
Loud grinder noise. Foreign object in the
grinder.
ƒ
Contact the hotline.
Brewing unit cannot
be inserted after
removing.
Brewing unit is not
locked correctly.
ƒ
Check that the handle for the
brewing unit locking mechanism is
correctly engaged (see chapter 9.3
on page 91).
Drive is not in the
correct position.
ƒ Press and hold the "My Coffee" but-
ton. Also press the ON/OFF button.
The appliance initialises. Release
the buttons again.
System error appears
on the display.
Software problem.
ƒ
Switch the appliance off and
on again (see chapter 4.1 on
page 64).
ƒ
Contact the hotline.