13
DELETING ALL THE LEARN COMMANDS
All the signals captured with the
LEARN
function can be deleted by setting the
9000
code on any of
the device selection buttons. This will restore the original commands on the buttons.
HOW TO CONTROL MELICONI AUDIO VIDEO ACCESSORIES
The
Universal 5 web
is already programmed to control the Meliconi Ghost Motor 100 motorised wall brackets
and the Meliconi Light Kit lighting strips. Simply set the code 4000 on one of the device selection buttons. To
fi
nd out which buttons are linked to the functions available, consult the online product guide in the www.meliconi.
com/guide website.
MEMO FUNCTION
The
MEMO
function enables you to record a sequence of commands and to recall them by pressing a single
button. For example: turn on the TV, turn on the DVD, play a video, etc. To access this function, consult the online
guide in the www.meliconi.com/guide website.
AUDIO CONTROL
When you select a device that does not have its own audio controls, if you press the
V+
,
V-
and
Mute
buttons the
audio on the device memorised as
TV
will be commanded.
This setting can be changed by linking the audio commands of a different device to the
V+
,
V-
and
Mute
buttons.
To do this follow the simple procedure outlined in the online guide in the www.meliconi.com/guide website.
Learning all the functions from a new remote control not yet included
in the Universal 5 web databank
With the Universal 5 web you can create up to
5
completely empty
keypads
so that in
LEARN
mode a
total of up to
64
new commands can be obtained.
Having constructed one of these keypads with the
LEARN
commands you can deactivate it by setting
another code on the device selection button and then recalling it exactly as it was by resetting the
8x00
code on the same or another device selection button.
1.
Follow the code entry procedure using one of the
following codes:
8000, 8100, 8200, 8300, 8400
.
2.
To acquire and save signals from one or more original
remote controls follow procedure.
HOW TO ACTIVATE ADDITIONAL COMMANDS
For lesser used functions,
fi
nd the additional commands by consulting the www.meliconi.com/guide website.
Using the online guide, as well as
fi
nding the code required to programme your remote control, you can also
fi
nd descriptions of which
Universal 5 web
remote control buttons correspond to the additional commands you
require. You can save additional commands on the
F1 - F2 - F3 - F4
function buttons.
