9
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
The remote control requires 2 new 1.5V alkaline
AAA/LR03
batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light
fl
ashes, the batteries
inserted are not charged and are about to go
fl
at, therefore you must
substitute them.
Do not leave
fl
at batteries inserted, as liquid may leak and damage the remote control
The
Universal 5 web
remote control is a universal remote, so its memory contains data relating to numerous
devices of various brands available on the market.
Each original device has a
speci
fi
c code
which must be used to set up the remote control.
Therefore, to use your Universal 5 web you
must
enter the speci
fi
c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A)
- INTERNET (recommended)
B)
- CELL PHONE (SMS)
C)
- MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the
www.meliconi.com/guide
website
to identify the speci
fi
c codes for the devices you wish to command. Then set the codes manually in your
MELICONI
remote control as described in the
ENTERING THE CODE DIRECTLY
procedure.
SETTING CODES USING INTERNET
Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their
remote control directly on their cell phone.
Simply send an
SMS
to this number
0039 345 7518893
as follows:
5A, Type, Brand, Model
-
Type = indicate the device to be controlled using one of the following abbreviations:
TV - SAT - DVD - VCR - TER
(Digital Terrestrial decoder)
-
AUX
(other audio video device).
-
Brand, Model = to indicate the brand and the model of the device to be controlled.
Example:
5A, TV, PHILIPS, 32PFL3614
(if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the
fi
rst code in the remote control as described in
the
ENTERING THE CODE DIRECTLY
section.
Stand in front of the device with the MELICONI remote control. Turn the device on and then press the
OFF
button
on the remote (or the
PLAY
button if the device is a
VCR/DVD
).
If the device does
NOT
switch off (or if the
VCR/DVD
does not start playing), try setting the consecutive code
in the
SMS
list in the remote control.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use
.
If they don’t,
you are probably using an incorrect code destined for a very similar device
; at this point
ignore
the SMS list and consult the
SETTING CODES USING A MANUAL CODE
section to
fi
nd a more suitable
code.
SETTING CODES USING A CELL PHONE
NOTE:
If you don’t receive an SMS on your cell phone or if the message says
ERROR / NO CODE
, it
means the system has not been able to process the data you have sent;
Do not try sending another
SMS
use the
MANUAL SEARCH
instead.
