Meler MACRO FOAM Series, Instruction Manual, Page: 27 / 88

INSTALLATION
3-7
MA-5127-ENG MACRO FOAM SERIES MELTER MANUAL
2. Using the right arrow, we advance to the next screen where the
overheating symbol appears.
3. Select the desired value with the up-down arrow.
The value displayed corresponds to the increase in real temperature
over the set point temperature permitted without activating the alarm
message.
4. Use the right arrow to advance to the next screen.
5. Exit the special menu using the left arrow and the tank temperatures
will once again be displayed.
All the special menu values will be saved.
Keeping a component on display
By default, the main display shows the tank temperatures. However, it is
possible to display indefinitely the temperatures of any component for analysis
or tracking.
1. Select the component you wish to see permanently with the left-right
arrow.
The corresponding LED will blink rapidly.
2. Hold the arrow button down for two seconds, selecting the desired
component.
3. The display will now remain on the selected component, without
changing.
4. Simple press any left-right arrow button again to restore the default
display (tank).
º C º C
--
-- --
1 0 1 0