User Manual for the Vacuklav
®
23-B
29
6.3.7 Test
printout ________________________________________________________________________
To check the printer functions and the communication between the printer and the autoclave, print out a test log as
follows:
Operator action
Shown on the display:
1. Press the "+" button and hold
it down; while holding it down,
press the "–" button. The
menu item “Function” with
sub-menu “Print” will appear.
2. Press the button "Program".
The menu item "Print" with
sub-menu "File transmission"
will appear.
3. Press the button "+" (or "-" )
repeatedly until the following
appears in the display: "Test
printout”.
4. Press the button “Program” to
start the test printout. Or, you
can press "Start-Stop" to
cancel this printout.
5. Press "Start-Stop" to return to
the menu “Function”.
6. Then press "Start-Stop" again
to return to the initial menu
position.
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
1 4 : 2 7 : 1 2
– 0 . 0 2 b a r 2 5 ° C
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
Program Start-Stop
T e s t p r i n t o u t
Program Start-Stop
P r i n t o u t