28
6.3.6
Deleting stored cycles from the memory _________________________________________________
You may wish to erase all stored cycles from the memory: for example, to avoid the warning “Printer memory full”.
This is possible only if you have set the immediate-printout option to “No” (see Section 7.3 of this manual). First,
switch on the power to the autoclave, and proceed as follows:
Operator action
Shown on the display:
1. Press the "+" button and hold
it down; while holding it down,
press the "–" button. The
menu item “Function” with
sub-menu “Print” will appear.
2. Press the button "Program".
The menu item "Print" with
sub-menu "File transmission"
will appear.
3. Press the button "+" (or "-" )
repeatedly until you see the
following in the display: "All
cycles delete".
4. Erase all cycles from memory
by pressing the button "Pro-
gram". You can cancel this
action by pressing "Start-
Stop".
5. Press "Start-Stop" to return to
the menu "Function".
6. Then press "Start-Stop" again
to return to the initial menu
position.
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
1 4 : 2 7 : 1 2
– 0 . 0 2 b a r 2 5 ° C
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
Program Start-Stop
A l l c y c l e s
D e l e t e
Program Start-Stop
A l l o c a t e d : 0
O p e n : 4 0