Chapter 8 – Function test
48
Display water quality
The water quality can be displayed on the display of the switched on
steam sterilizer at any time - even while a program is running.
To do this keep the K
EY
(-) pressed until the display shows the
→
conductivity. The conductivity is stated in µS/ cm.
As soon as you release the (-) K
EY
, the display returns to its previous
status (e.g. initial state).
Pre-heating temperature of
the chamber
If you press the K
EY
(-) twice shortly and the second time keep it pressed,
the pre-heating temperature of the chamber is shown instead of the
→
conductivity.
AIN6: Conductivity
7
µ
S/cm
AIN4: Temp. Preheat.
120°C
