Chapter 2 – Commissioning
5
Chapter 2 – Commissioning
Fitting the glass flask
1.
Remove all the individual parts from the glass flask carefully.
2.
Remove the packaging from the individual parts.
3.
Place the glass flask in the plastic guard ring.
4.
Loosen a screw on the metal collar on the neck of the glass flask.
5.
Place the collar on the neck of the glass flask in such a way that the other screws on the collar lie
exactly opposite the spout cap (pos. a).
6.
Refasten the metal collar with both screws.
PLEASE NOTE
Do not overtighten the screws when tightening.
7.
Fill the glass flask 3/4 full with warm tap water. Add 1-2 drops of washing-up liquid and clean the
inside of the glass flask.
8.
Afterwards, rinse and clean the glass flask thoroughly with clear water.
9.
Place the cover (pos. b.) on the glass flask in such a way that the spout remains open.
a
b