9
The last section of the screen is used to
display the loaded G-code
. You can use the it
to browse your code, to execute it line by line, or even to
start operations in the middle
of it
, as shown on the picture below.
At the bottom of this section, you can find a
command line
, also called
MDI
, that is used
to
type G-code manually and send it directly to the machine
. For instance, the com-
mand shown below will move the machine at maximal speed to the
working coordi-
nates X50 and Y100
. If you want to know more about this, you can find all the informa
-
tion you need inside the PlanetCNC G-code documentation, which can be downloaded
on the support page of our website.
G-CODE PANEL & MDI
PLANETCNC
