8
In the middle of the screen, you will find a 3D view representing the
reachable XYZ
working volume
of the machine. The
orange cone
represents the
tool
, so the central
point of the machine from which all coordinates are calculated.
If a
G-code is loaded
, the graphical interface will also
display the toolpath
that the ma-
chine will follow to mill that part.
The
toolbar
located on
top
can be used to change the
views
(top, side,...), but also to
zoom
on the workpiece, on the tool, etc.
GRAPHICAL INTERFACE
PLANETCNC
