37
be used to establish a preliminary evalu-
ation of the exposure.
The vibrations and noise emissions gen-
erated when the power tool is actually
being used may deviate from the spec-
ified values depending on the manner
in which the power tool is used, and
specifically, on the basis of the type of
workpiece being machined. This may be
caused by the following influencing fac-
tors that should be taken into account
before and during each use:
• Is the device being used correctly?
• Is the correct type of material being
processed?
• Is the device in proper working order?
• Are the handles or optional vibration
handles mounted and fixed securely
up against the body of the machine?
If your hands experience an unpleasant
sensation or the skin changes colour
while you are using the machine, imme-
diately discontinue your work. Take
sufficient breaks. If you do not take suf-
ficient breaks, this may cause a hand/
arm vibration syndrome.
You should estimate the level of load
caused in conjunction with the work
or use of the machine and take the
appropriate breaks. This method can be
used to considerably minimise the level
of load during the entire working time.
Minimise risks in which you are exposed
to vibrations. Take care of your machin-
ery in accordance with the directions in
the operation instructions.
If the machine is to be used frequently,
contact your dealer and arrange anti-vi-
bration equipment (handles) if neces-
sary.
Avoid using the tool in temperatures of
t = 10 °C or lower. Draw up a working
schedule which can be used to minimise
vibration loads.
Information about minimising noise
A certain amount of noise is unavoida-
ble when using this device. Ensure you
carry out noise-intensive work during
permitted times. Maintain the quiet peri-
ods and limit your work to the absolute
minimum. For the sake of your personal
protection and the protection of persons
in the vicinity, suitable ear defenders
should be worn.
3 – Components
1 Switch for drilling/hammer drilling
2 Locking button for continuous opera-
tion
3 Supply cable
4 On/Off switch with revolution regula-
tion
5 Right/Left directional switch
6 Additional handle
7 Depth stop
8 Drill chuck
4 – Correct use
Drilling in wood and metal, impact drill-
ing in concrete. Do not use machines,
tools and accessories for additional
applications (see manufaturer’s instruc-
tions) for works other than those for
which they are designed for. All other
applications are expressly ruled out.
WARNING! The warranty is void-
ed by any improper use or use
not in accordance with manufactur-
er‘s instructions. Any necessary
repair must be performed by quali-
fied personal.
5402270-Schlagbohrmaschine_man.indd 37
5402270-Schlagbohrmaschine_man.indd 37
13.08.20 06:45
13.08.20 06:45
