Insert plug in socket: The electric planer
is now ready to operate.
Starting
When the planer is started, the cutter
shaft must not be in contact with the
workpiece!
Hold electric planer with both hands.
1 Press and hold down safety catch
2 Press and hold down button: The
electric planer will begin to run.
For safety reasons the On/Off button
cannot be locked.
Risk of injury. Do not interfere
with safety catch and On/Off
button.
As soon as the motor has reached full
speed, the cutter shaft may be applied
to the workpiece.
Switching off
When switching off, the cutter shaft
must no longer be in contact with the
workpiece. Leave the planer sole resting
on the workpiece!
Release switch and switch lock (1). The
motor slows to a stop.
Risk of injury from open blades
still running! Wait until motor
comes to a dead stop!
Only then should the electric planer be
removed from the workpiece and put
down.
9 – Mode of operation
Preparing the workpiece
Remove foreign bodies (nails, screws,
mortar residues, etc.) from the workpiece,
as they are a hazard for the blades.
Risk of injury, if workpiece flies
out! Securely fasten workpiece!
Clamp workpiece in a vice or fasten to
the workbench with cramps. Ensure
planing path is clear!
Basic work procedure
Before starting place the front sole of the
planer on the workpiece. Do not place
the cutter shaft on the workpiece yet!
Start the electric planer.
Feed the electric planer evenly onto the
workpiece in the direction of work
shown. When working, feed the planer
forward carefully and evenly. Do not
plane backwards!
52
MW-5410020-Bedien-2006.indd 52
MW-5410020-Bedien-2006.indd 52
20.05.20 12:22
20.05.20 12:22
