45
Setting the cutting depth
1. Undo the adjustment screw (12).
2. Swing the saw shoe downwards.
3. Set the cutting depth using the scale.
Tooth tips must reach approximately
2 mm out of the wood.
Adjusting the saw shoe (angled cut)
1. Undo the adjustment screw (11).
2. Set the shoe to the required number
of degrees 0 – 45°.
3. Tighten the adjustment screw.
Setting the splitting wedge
1. Undo the adjustment screw.
2. Swing the saw shoe downwards.
3. Undo the screws.
4. Set the splitting wedge and tighten
the screws again.
Changing the saw blade
1. Open the pendulum protective cover
and hold firmly.
2. Hold the flange (8) with the flange
wrench.
3. Undo the hexagonal screw (6) with
the pin wrench.
4. Remove flange and blade by pulling
downwards.
8
6
Fig. 6
12
7
11
4
3
B
45°
3 mm
4
Fig. 5
Fig. 4
Fig. 3
5453680-Handkreiss-man 30.01.14 07:17 Seite 45
